You have both sides doing clocking internal? Also, what is the config under [protocols isis]?
Stefan Fouant GPG Key ID: 0xB4C956EC Sent from my HTC EVO. ----- Reply message ----- From: "Xavier Beaudouin" <k...@oav.net> Date: Thu, Jul 7, 2011 10:51 am Subject: [j-nsp] ATM2 pic connected to another M7i cannot get ISIS adjatency ; ( To: <juniper-nsp@puck.nether.net> Hi there, I have 2 M7i with pic : PIC 3 REV 08 750-005724 CN5430 2x OC-3 ATM-II IQ, MM Since I don't use ATM, I wanted to use this as interrouter connection using : jun-m7i-1 at-0/3/0 <-> jun-m7i-2 at-0/3/0 jun-m7i-1 at-0/3/1 <-> jun-m7i-2 at-0/3/1 I finaly found a way to make the communication (ipv4) between the routers, but it doesn't seems to work with ISIS. Here is jun-m7i-1 base configuration : interfaces { at-0/3/0 { description "To jun-m7i-2_at-0/3/0"; mtu 9192; clocking internal; encapsulation atm-pvc; atm-options { pic-type atm2; vpi 1; } unit 0 { encapsulation atm-snap; vci 1.100; oam-period 3; oam-liveness { up-count 3; down-count 3; } family inet { address xx.xx.xx.125/30; } family iso; } } at-0/3/1 { description "To jun-m7i-2_at-0/3/1"; mtu 9192; clocking internal; encapsulation atm-pvc; atm-options { pic-type atm2; vpi 1; } unit 0 { vci 1.100; family inet { address xx.xx.xx.121/30; } family iso; } } lo0 { description Loopback; unit 0 { family inet { no-redirects; primary; address xx.xx.xx.1/32 { primary; preferred; } } family iso { address 49.0001.0xxx.xxxx.xxx1.00; } } } } On jun-m7i-2 : interfaces { at-0/3/0 { description "To jun-m7i-1_at-0/3/0"; mtu 9192; clocking internal; encapsulation atm-pvc; atm-options { pic-type atm2; vpi 1; } unit 0 { encapsulation atm-snap; vci 1.100; oam-period 3; oam-liveness { up-count 3; down-count 3; } family inet { address xx.xx.xx.126/30; } family iso; } } at-0/3/1 { description "To jun-m7i-1_at-0/3/1"; mtu 9192; clocking internal; encapsulation atm-pvc; atm-options { pic-type atm2; vpi 1; } unit 0 { encapsulation atm-snap; vci 1.100; family inet { address xx.xx.xx.122/30; } family iso; } } lo0 { description Loopback; unit 0 { family inet { no-redirects; primary; address xx.xx.xx.xx/32 { primary; preferred; } } family iso { address 49.0001.0xxx.xxxx.xxx2.00; } } } } show isis interface IS-IS interface database: Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric at-0/3/0.0 3 0x1 Point to Point Point to Point 10/10 at-0/3/1.0 3 0x1 Point to Point Point to Point 10/10 lo0.0 0 0x1 Passive Passive 0/0 Any clues, ideas ? Kind regards, Xavier _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp