> You only show 14k external LSA's in the database which is much
> smaller than full BGP feed.
Yes, that was only a "snapshot". As i mentioned in my post, quantity of
routes increases up to ~360k routes, as i saw in my first try. But in my
posted example, for security reasons, i shut down neighbor before.
> Are the above snippets from the PE router that is originating the
> external LSA's?
Yes
> It would be better to have your network and edge
> routers in area 0 and customers in different areas.
My network/core routers don't run OSPF. IS-IS is used between them. I
only configured OSPF on one PE-router for connecting customers, which
were connected to a Cisco with EIGRP before.
> You can have only an area 1 but it would be isolated from other areas
> and not ideal.
I would only need it to announce a default-route and receive a few
routes from CPE router, which will be redistributed into iBGP.
I thought it could be a good EIGRP-->OSPF migration possibility. What it
seems that i was wrong ;-)
> Never run an IGP with your customers (not even as PE-CE
> routing protocol in an l3vpn). It's just asking for trouble.
Okay, i understand the common tenor. I think i will use eBGP for
redundantly connecting customers to our (Juniper) PE routers.
Thanks all...
Regards,
Alex
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
