It's probably easier to use QinQ. Doug
-----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Matthew S. Crocker Sent: Sunday, July 17, 2011 7:08 AM To: juniper-nsp@puck.nether.net Subject: [j-nsp] dot1q CCC/MPLS on EX4200 series switches Hello, I have a customer handing me a GigE with dot1q tags to my EX4200 switch. I need to carry the GigE/dot1q over a couple other EX4200s and terminate on a GigE port of my MX80. I've read through the docs for building MPLS/ccc circuits between the two devices. It isn't clear to me if I need to establish a ccc for each vlan (i.e. I will need to know the VLANs the customer is sending me). Or, can I create one CCC that will catch all tags and transport them across my MPLS and dump them out the MX80. I would prefer not having to know the VLANs my customer is sending me. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp