That is what I do as well. You will find the 'interface-specific' knob
invaluable. You'll have to apply it per ifl in/out.
-Michael
[pseudocode]
firewall {
family inet 6 {
filter count-v6 {
interface-specific;
term count-v6 {
then {
count your-counter-name; #replace the name
accept; # or whatever
}
}
}
}
}
On 8/24/2011 7:37 AM, Matti Saarinen wrote:
Ido Szargel wrote:
I am looking for a way to poll snmp data on IPv6 traffic (bps, pps) on
MX80 to a cacti graph, does anyone have any luck with doing that?
(Not MX80 but M10i but the difference isn't hopefully significant in
this case.) I configured an IPv6 filter under which I defined a counter
and the value of that counter is read by SNMP. Not the most elegant
solution but it appears to work.
Cheers,
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp