On (2011-09-08 15:30 +0100), Mike Williams wrote: > Sorry, the commit time is fine, couple seconds tops. > > # show | display set | count > Count: 1057 lines > > After that the RE goes off and and runs the 700k routes it has already got in > inet.0 through the policy, "repopulating" the 2 other RIBs. It's this which > takes the time. > > The fact it takes several minutes to run is only a moderate annoyance. > Especially now others have confirmed that the MX80 really isn't that fast at > all.
Hmm, could you during this operations run 'top' in CLIa and couple times 'show chassis routing-engine' (and maybe even 'show chassis tfeb' just in case) just to see if what you're doing is CPU bound. I'm not entirely convinced that all blame can be put on RE, maybe JNPR has less optimized code for PPC than Intel, some timing issues etc. RSP720 has less beefy CPU but feels lot snappier with RIB. -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp