Hi, I've got a NSSA with a few external routes, which are flooded as type-7 NSSA LSAs in the area. These are converted to type-5 by the ABR and flooded in area 0 (and other eligible areas). All as expected.
However, the type-5 LSAs is quite pointless, as they only describe more-specific routes of a prefix that's already set up as an area-range on the ABR and are therefore already flooded in area 0 as a type-3 LSA. I can limit the amount of type-5 LSAs that are flooded in area 0 by configuring the same nssa area-range, but then I only end up with two redundant LSAs flooded in area 0 for the same prefix (one type-3 and one type-5). So I'm wondering if it's possible to configure the ABR so that it doesn't generate any type-5 LSAs and flood them into area 0 for any routes that are already covered by a type-3 LSA? Best regards, -- Tore Anderson Redpill Linpro AS - http://www.redpill-linpro.com _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp