Hi, you are correct, the disk exceeded the maximum write errors permitted by the SMART value and thus is marked as bad. Prepare for a complete failure of the drive soon (1-30 days likely). May be the right time to upgrade the harddisk to a SSD. http://juniper.cluepon.net/Replacing_the_harddisk_with_solid_state_flash
Best regards, Jonas Am Dienstag, den 20.09.2011, 17:09 +0200 schrieb Juniper GOWEX: > Hi all, > > From yesterday at the log of my M20 are the following message : > > smartd[2595]: Device: /dev/ad1a, Failed attribute: (200)Write > Error Rate > > It´s informative, but i think that there is a problem with my HDD ( I > still have to run the smartd commands ) . > > Somebody had this problem ? > > > Best Regards > > Isidoro > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp
signature.asc
Description: This is a digitally signed message part
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
