Hello, I'm trying to setup MPLS between an ERX310 and a Brocade XMR4000.
I receive the following error: ldpGeneral (MPLS): [ldp_process_initialization_message]: PDU too small, from 1.10.1.1 1.10.1.1 is the loopback int on the brocade 1.10.1.2 is the loopback int on the ERX Config mpls ldp ! mpls ldp discovery transport-address 1.10.1.2 ! mpls ldp interface profile default mpls Interface to the XMR: interface gigabitEthernet 1/1.100 vlan id 100 ip address 1.1.1.2 255.255.255.252 mpls mpls ldp The MTU value is 1548 Kind regards, Tom _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
