Dear All I am working on a requirement to enable the MPLS Backbone with MPLS TE in such a way that I have LSPs running from PE-P routers and P-PE routers to avoid full mesh of LSPs.
I can not make it working with RSVP as I think I need to enable LDP on the RSVP TE Tunnel but unable to find a way to do so..The MPLS Backbone has separate dedicated VPNv4 RRs . On RRs and PEs I have used a Discard Default Route under inet.3 which helps to reflect the vpnv4 routes from RR and accept them on PEs. Even I tried to announce the LSP into IGP but that did not work and I have to instead manually configure static route under inet.3. I understand this is because the tunnels were PE-P and not PE-PE.. Now how can I solve the issue of passing MPLS VPN Traffic across broken LSPs in the backbone.. Setup is as below RR1 ! ! ----------LSP1------------------Core1-------------LSP2--------------------- CE1-PE1 MPLS TE-OSPF Area 0 PE2-CE2 ----------LSP3------------------Core2-------------LSP4--------------------- ! ! RR2 -- Regards Vaibhava Varma _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp