> Are lt- intefaces are supported on MX80 ?
Yes.
> I have MX80 + 2 20x1G SFP
> linecards. I would like to setup logical router and provide IP
> connectivity between logical router and global instance using lt-
> interface. If it's supported then what number of interface I should
> use and is exist any bandwidth limitation ?
On the 1G MICs there is extra capacity to handle an lt interface, so
you can configure under chassis, assuming a 20x1G MIC in MIC slot 0:
fpc 1 {
pic 1 {
tunnel-services {
bandwidth 1g;
}
}
}
and this you lt-1/1/10 which can be configured in the normal way.
Steinar Haug, Nethelp consulting, sth...@nethelp.no
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
