Yes - we have (for example) a 10 member VC with EX4200's setup similar. They are all deployed top of rack but in two physical rows - to cross the rows we use 10GE and between the racks we use the VC cables.
The only question is whether or not you can do AE over the SFP ports for VC purposes - that's one thing I've never tried but sure someone will chime in that has... Paul -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Dave Peters Sent: Tuesday, January 03, 2012 12:37 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] Ex Series VC with *both* high-speed backbone *and* link-aggregation Hi all-- This is simple, but I can't find definitive proof online . . . Can I set up a Juniper EX series virtual chassis using a high-speed backbone on one floor of a building and then connect that VC to another switch (or two) via link-aggregation on the SFP ports? I'm not sure you can mix the VC connections, is all. Can I use both the stacking backbone on one floor and the SFP links on another floor in the same virtual chassis? Thanks much. -- Dave Peters Technical Director Terabit Systems 2565 3rd Street #218 San Francisco, CA 94107 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp