Hi there..
I'm trying to work with an interface that has mixed subinterfaces. some of the subinterfaces are part of a bridge domain, some are family inet, and one interface is PPPOE for subscriber termination. The family inet and bridge domain combination works fine but as soon as I try to add an encapsulation of ppp-over-ethernet it tells me invalid.. Is there a way around this that I'm missing without moving the PPPOE to a separate interface? Juniper MX80 running 11.2R5.4 paul@dis1.beachburg1> show configuration interfaces ge-1/2/8 description "Wireless Network Trunk"; vlan-tagging; encapsulation flexible-ethernet-services; unit 400 { description Wireless_Public_DHCP; encapsulation vlan-bridge; vlan-id 400; family bridge; } unit 401 { description Wireless_Private_Management; encapsulation vlan-bridge; vlan-id 401; family bridge; } unit 402 { description Wireless_PPPOE; encapsulation ppp-over-ether; vlan-id 402; pppoe-underlying-options { duplicate-protection; dynamic-profile PPPOE; } } paul@dis1.beachburg1# commit check [edit interfaces ge-1/2/8] 'unit 402' Link encapsulation type is not valid for device type error: configuration check-out failed Thanks, Paul _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp