On Wed, Feb 22, 2012 at 03:39:12PM +0100, Bjørn Tore wrote: > interfaces { > ge-0/0/0 { > description "upstream"; > mtu 9192; > unit 0 { > family ethernet-switching { > port-mode trunk; > } > } > } > ge-0/0/2 { > description "customer"; > mtu 9192; > unit 0 { > family ethernet-switching { > port-mode access; > } > } > } > } > vlans { > my-vlan { > description QinQ; > vlan-id 7; > interface { > ge-0/0/0.0; > ge-0/0/2.0; > } > dot1q-tunneling; > } > }
I think this assumes that the frames arrive on ge-0/0/2 tagged. Our frames come in to the switch untagged, this is the whole problem. Alex _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp