Juniper GOWEX [juni...@iber-x.com] wrote: > Thank you very much for your help. > > Both RE?s have the same software image. and now my doubts are about > the configuration, Do I need to edit groups RE0 and re1? In this > moment I haven?t IP in the fxp0 interface, How I can access the > Backup RE from the Master RE ?. >
Some people use apply-groups for setting IP addresses on fxp0, but I use inband management with no IP on fxp0, instead the management IP resides on lo0 with filters. I use a null modem serial cable to access to backup RE. With management on lo0, the only time I'd see re1 over the network is if it was active. Maybe there's a vty command for that, I've never checked. Chris _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp