i am use 10.4R9.2. it did change it to ::ffff when i advertise the bgp route as next-hop . when i add a ipv6 route on interface, the router receive the route from peer, not ignore any more. BUT is it the right way we do ? any other solution? any advice is welcome. lab@test# run show version Hostname: test Model: olive JUNOS Base OS boot [10.4R9.2] JUNOS Base OS Software Suite [10.4R9.2] JUNOS Kernel Software Suite [10.4R9.2] JUNOS Crypto Software Suite [10.4R9.2] JUNOS Packet Forwarding Engine Support (M/T Common) [10.4R9.2] JUNOS Packet Forwarding Engine Support (M20/M40) [10.4R9.2]
------------------ Original ------------------ From: "Per Granath"<per.gran...@gcc.com.cy>; Date: Sat, Mar 17, 2012 02:42 PM To: "bruno"<bruno.juni...@gmail.com>; Cc: "Kazmierczak, Tomasz (NSN - US/Irving)"<tomasz.kazmierc...@nsn.com>; "juniper-nsp"<juniper-nsp@puck.nether.net>; Subject: Re: [j-nsp] bgp ipv6 route problem Are you sure you are not running Junos 11.x ? I said before it was in 10.4 that mapped addresses changed from :: to ::ffff: but it was probably from 11.1. Been some time since I looked into it. Have a look at the Day One book Advanced IPv6 Configuration for an example with ::ffff:. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
