Sorry - I thought it was M10i you were talking about... On the MX80 side this it the largest we have at the moment is around 650k BGP routes.
Paul -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Paul Stewart Sent: April-23-12 6:03 AM To: 'Md. Jahangir Hossain'; 'Jonathan Lassoff' Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] About Juniper MX10 router performance The 1.6 million sounds around right but have nothing to confirm it. The largest table we have running on an M10i looks like this: Table Tot Paths Act Paths Suppressed History Damp State Pending inet.0 549751 410074 0 0 0 0 bgp.l3vpn.0 0 0 0 0 0 0 bgp.l2vpn.0 0 0 0 0 0 0 inet6.0 65318 63375 0 0 0 0 Not sure if that helps or not - memory consumption sits around 50% That's from an M10i running RE850 cards... Paul -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Md. Jahangir Hossain Sent: Monday, April 23, 2012 2:53 AM To: Jonathan Lassoff Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] About Juniper MX10 router performance Thanks jonathan to reach you again. Actually i need to confirmation how many BGP routes this model can handle. In some of forum i found 1.6million but in juniper site i can not found this information. So i am a little bit confused that way i need to know the practical information if any one used this product related to this service. thanks jahangir ________________________________ From: Jonathan Lassoff <j...@thejof.com> To: Md. Jahangir Hossain <jrjahan...@yahoo.com> Cc: "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> Sent: Monday, April 23, 2012 12:42 PM Subject: Re: [j-nsp] About Juniper MX10 router performance On Sun, Apr 22, 2012 at 10:24 PM, Md. Jahangir Hossain <jrjahan...@yahoo.com> wrote: > Dear valued member: > > > Wishes all are fine. > > > i need > suggestion from you about Juniper MX10 router performance who already > implement this. i want to buy this router for IP Transit provider > where i received all global routes . > > > it would be nice please put your valued suggestion about this issue . Jahangir -- we spoke briefly about this on NANOG just now as well. Do you have a specific question about the MX10? What is it that you're trying to accomplish? --j _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp