Justin, I have already followed the link which you posted and formatted the card but it did not help. I am using SanDisk CF card with PCMCIA adapter.
BR// Abdullah Sent from my iPhone On May 1, 2012, at 12:31 AM, "Justin M. Streiner" <strei...@cluebyfour.org> wrote: > On Mon, 30 Apr 2012, Abdul 2012 wrote: > >> Hello Everyone, >> >> I have created a booting media with PCMCIA card for my m7i router through >> the following procedure > > It sounds like you need to format the card before using it. Note - I've only > tried this using compact flash cards, so things like disk geometry could be > different on a PCMCIA card. > > Check out the link below for some options. Much of this is likely not > Juniper approved, and I take no responsibility whatsoever for whatever you do > to your rotuer as a result. > > http://serverfault.com/questions/24653/can-i-use-third-party-compact-flash-in-a-juniper-m10i-router > > Specifically, look at the next-to-last comment from the bottom. > > jms > >> user1@3-1> start shell >> % >> % >> % cd /var/tmp >> % pwd >> /var/tmp >> % >> % >> % >> % ls >> install-media-10.4R8.5-domestic vi.recover >> sampled.pkts >> % >> % su >> root@3G-1% dd if=/dev/zero of=/dev/ad3 count=20 >> ad3: rejecting BSD label: raw partition offset != slice offset >> ad3: start 256, end 374783, size 374528 >> ad3c: start 0, end 374527, size 374528 >> ad3s1: rejecting BSD label: raw partition offset != slice offset >> ad3s1: start 256, end 374783, size 374528 >> ad3s1c: start 0, end 374527, size 374528 >> ad3s2: rejecting BSD label: raw partition offset != slice offset >> ad3s2: start 375040, end 749567, size 374528 >> ad3s2c: start 0, end 374527, size 374528 >> ad3s3: rejecting BSD label: raw partition offset != slice offset >> ad3s3: start 749568, end 1748991, size 999424 >> ad3s3c: start 0, end 999423, size 999424 >> ad3s4: rejecting BSD label: raw partition offset != slice offset >> ad3s4: start 1748992, end 2000895, size 251904 >> ad3s4c: start 0, end 251903, size 251904 >> 20+0 records in >> 20+0 records out >> 10240 bytes transferred in 0.057968 secs (176649 bytes/sec) >> >> root@3G-1% dd if=install-media-10.4R8.5-domestic of=/dev/ad3 bs=64k >> dscheck(ad3): b_bcount 13383 is not on a sector boundary (ssize 512) >> dd: /dev/ad3: Invalid argument >> 5630+1 records in >> 5630+0 records out >> 368967680 bytes transferred in 361.656024 secs (1020217 bytes/sec) >> root@3G-1% >> >> >> When I try to boot my router from this PCMCIA card I stuck in the >> following: >> >> >> >> Award Modular BIOS v4.51PG, An Energy Star Ally >> Copyright (C) 1984-98, Award Software, Inc. >> >> BIOS Version 1.8 >> 09/18/2003-i440BX-SMC67X-2A69TU00C-00 >> >> Will try to boot from : >> PCMCIA ATA Flash Card >> Compact Flash >> Primary IDE Hard Disk >> Ethernet >> Boot Sequence is reseted due to a PowerUp >> >> Trying to Boot from PCMCIA ATA Flash Card >> CD Loader 1.00 >> >> uilding the boot loader arguments >> 8172 >> 3629 >> 4411 >> locating the loader and the BTX >> >> >> >> >> What does that mean? Is there any wrong thing with my procedure? >> >> Regards, >> Abdullah >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp