Hi, You should be classifying on ingress. Classification is only for 'internal' treatment. Then you do rewrite on egress interface.
Best Regards Daniel 7 jun 2012 kl. 02:08 skrev "Saba Sumsam" <[email protected]>: > Hi, > This is the first time I am configuring CoS and need some help. The > requirement is to classify some traffic going out an interface and assign a > DSCP marking to it. This is a simplified version of the configuration I > have, but I fail to see any DSCP markings on traffic matching the criteria. > > [edit firewall filter TEST_FF] > term TERM1 > from { > source-address { > 10.1.15.24/32; > 10.1.15.25/32; > } > } > then { > loss-priority low; > forwarding-class FWDCLASS; > accept; > } > > [edit class-of-service] > forwarding-classes { > queue 5 FWDCLASS; > > interfaces { > ae1 { > unit 20 { > rewrite-rules { > dscp REWRITE; > } > > rewrite-rules { > dscp REWRITE { > forwarding-class FWDCLASS { > loss-priority low code-point af31; > } > } > > [edit interfaces ae1.20] > vlan-id 20; > family inet { > filter { > output TEST_FF; > } > } > > Regards, > > *Saba Sumsam* > *Network Engineer - Level 2* > eintellego Pty Ltd > [email protected] <[email protected]> ; www.eintellego.net > > Phone: 1300 753 383 > > Cell +61 (0)424753773 > > facebook.com/eintellego > PO Box 7726, Baulkham Hills, NSW 1755 Australia > > The Experts Who The Experts Call > Juniper - Cisco – Brocade - IBM > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- This e-mail has been checked for virus by IPnett's Security solution -- > -- This e-mail has been checked for virus by IPnett's Security solution -- _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
