I want to add:
The interface reth2 is connected to an interface ge-0/0/21 on a switch
EX4200.
The interface is in trunk mode. (it's the same if the interface is in
access mode).
This interface ge-0/0/21 is UP.
Thanks for your help
Roland DROUAL
titi@AS-EX4200-01# show interfaces ge-0/0/21
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members v010-DMZ;
}
}
}
titi@AS-EX4200-01# run show interfaces ge-0/0/21
Physical interface: ge-0/0/21, Enabled, Physical link is Up
Interface index: 132, SNMP ifIndex: 546
Link-level type: Ethernet, MTU: 1514, Speed: 1000mbps, Duplex:
Full-Duplex, BPDU Error: None,
MAC-REWRITE Error: None, Loopback: Disabled, Source filtering:
Disabled, Flow control: Enabled,
Auto-negotiation: Enabled, Remote fault: Online
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x0
Link flags : None
CoS queues : 8 supported, 8 maximum usable queues
Current address: 50:c5:8d:b6:e3:98, Hardware address: 50:c5:8d:b6:e3:98
Last flapped : 2012-04-08 17:53:45 CEST (3d 19:27 ago)
Input rate : 0 bps (0 pps)
Output rate : 504 bps (0 pps)
Active alarms : None
Active defects : None
Interface transmit statistics: Disabled
Logical interface ge-0/0/21.0 (Index 94) (SNMP ifIndex 547)
Flags: SNMP-Traps 0x0 Encapsulation: ENET2
Input packets : 12
Output packets: 491194
Protocol eth-switch
Flags: Trunk-Mode
titi@AS-4200-01# show vlans v010-DMZ
vlan-id 10;
titi@AS-EX4200-01# run show vlans v010-DMZ
Name Tag Interfaces
v010-DMZ 10
ge-0/0/9.0*, ge-0/0/11.0, ge-0/0/12.0,
ge-0/0/13.0, ge-0/0/15.0*, ge-0/0/21.0*,
ge-0/0/22.0*
Le 11/06/2012 11:49, roland DROUAL a écrit :
Hello the List,
I have a problem with an redundant interface reth2.
I think the configuration is right, but I can't ping the @ IP
The physical link is up, but the redundant interface is not enabled.
How can I do, to have the reth2 physical link enabled ?
Thanks for your help.
Roland DROUAL
============================
toto@AS-SRX650-01# show interfaces
ge-6/0/21 {
gigether-options {
redundant-parent reth2;
}
}
ge-15/0/21 {
gigether-options {
redundant-parent reth2;
}
}
...
reth2 {
description "802.1Q vers DMZ1";
vlan-tagging;
redundant-ether-options {
redundancy-group 1;
}
unit 10 {
vlan-id 10;
family inet {
address 193.48.41.193/29;
}
}
}
==============================
toto@AS-SRX650-01# run show interfaces
Physical interface: ge-6/0/21, Enabled, Physical link is Up
Interface index: 157, SNMP ifIndex: 299
Link-level type: Ethernet, MTU: 1518, Link-mode: Full-duplex, Speed:
1000mbps, BPDU Error: None, MAC-REWRITE Error: None,
Loopback: Disabled, Source filtering: Disabled, Flow control:
Enabled, Auto-negotiation: Enabled, Remote fault: Online
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x0
CoS queues : 8 supported, 8 maximum usable queues
Current address: 00:26:88:e2:a5:bd, Hardware address: 00:26:88:e2:a5:bd
Last flapped : 2012-06-08 01:35:48 UTC (1d 16:47 ago)
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Active alarms : None
Active defects : None
Interface transmit statistics: Disabled
Logical interface ge-6/0/21.10 (Index 98) (SNMP ifIndex 597)
Flags: SNMP-Traps 0x0 VLAN-Tag [ 0x8100.10 ] Encapsulation: ENET2
Input packets : 0
Output packets: 0
Security: Zone: Null
Protocol aenet, AE bundle: reth2.10 Link Index: 0
Logical interface ge-6/0/21.32767 (Index 97) (SNMP ifIndex 578)
Flags: SNMP-Traps 0x0 VLAN-Tag [ 0x0000.0 ] Encapsulation: ENET2
Input packets : 0
Output packets: 0
Security: Zone: Null
Protocol aenet, AE bundle: reth2.32767 Link Index: 0
But I can't see the interface reth2. I should see:
- "Physical interface: reth2, Enabled, Physical link is Up ...."
- " Logical interface reth2.10 ...."
and I don't see them. the physical interface reth2 seems to be not
enabled.
=================================
And so, there is no route for the range IP 193.48.41.192/29, via reth2.10
toto@AS-SRX650-01# run show route
inet.0: 11 destinations, 11 routes (10 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
10.1.3.0/29 *[Direct/0] 1d 18:58:31
> via reth0.201
10.1.3.1/32 *[Local/0] 1d 18:58:31
Local via reth0.201
10.1.4.0/29 *[Direct/0] 1w3d 20:07:04
> via reth1.100
10.1.4.2/32 *[Local/0] 1w3d 20:07:04
Local via reth1.100
10.96.0.0/11 *[Static/5] 1w1d 16:00:44
> to 10.1.4.1 via reth1.100
10.115.0.0/16 *[Direct/0] 1w3d 21:08:07
> via fxp0.0
10.115.7.11/32 *[Local/0] 1w3d 21:08:07
Local via fxp0.0
10.192.0.0/11 *[Static/5] 1d 18:58:31
> to 10.1.3.2 via reth0.201
195.221.125.204/30 *[Direct/0] 1d 19:22:26
> via reth0.955
195.221.125.206/32 *[Local/0] 1d 19:56:26
Local via reth0.955
================================
The interface reth2 is in a security zone:
security-zone DMZ {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
reth2.10;
}
}
}
}
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp