Thanks for the info guys. I know it is not a recommended solution, but I have 2 ISP links in 2 different locations, which are connected together via a single 10GB vlan trunk between 2 switches, so I'm kinda stuck.
Spammy -----Original Message----- From: Clay Haynes <chay...@centracomm.net> To: "spam...@fioseurope.net" <spam...@fioseurope.net>, "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> Date: Mon, 16 Jul 2012 12:06:52 +0000 Subject: Re: [j-nsp] Quick Question About HA Setup SRX Technical Note 21 will have the Design Considerations and Deployment Scenarios you need. This link does require an account to login first. http://kb.juniper.net/InfoCenter/index?page=content&id=TN21 [http://kb.juniper.net/InfoCenter/index?page=content&id=TN21] - Clay On 7/16/12 5:04 AM, "Spam" <spam...@fioseurope.net> wrote: >Is it possible to connect 2 SRX devices together into a HA Cluster by >connecting >the Control & Fabric Interlinks via switches or must they be directly >connected. > >My planned setup is as follows: > >SRX<->Switch<->10GB Xconnect<->Switch<->SRX > >I can also give each connection is own dedicated VLAN if that would help. > >Spammy > > >_______________________________________________ >juniper-nsp mailing list juniper-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/juniper-nsp [https://puck.nether.net/mailman/listinfo/juniper-nsp] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp