On Mon, Jul 23, 2012 at 11:02 PM, Aaron Dewell <aaron.dew...@gmail.com> wrote: > I ran into an odd behavior here tonight, I'm hoping someone has some ideas. > We have 8 routers on a broadcast OSPF segment. All are advertising their > loopback addresses (amongst other things). I'll call this R1 to R8 for now. > Their IP addresses on this shared segment are 192.168.0.16X/28 (X > corresponding to RX). > > R2 is the current DR and R6 is the BDR. All the priorities are the same, not > that it matters. > > From R7, all routes to the other routers' loopback address cross R2! I'm not > sure if it's because it happens to be the DR or what. > > acd@R7> show route <R6's loopback> > > inet.0: xxxx destinations, xxxx routes (xxxx active, 0 holddown, 4 hidden) > + = Active Route, - = Last Active, * = Both > > <R6's loopback>/32 *[OSPF/10] 23:57:02, metric 40045 > > to 192.168.0.162 via ge-0/0/3.200 > > The metric indicates that the path is: R7->R2->R1->R6, which is proven by the > traceroute. The metric for this broadcast segment is 20000 on all routers. > The 45 is a 10G interface directly connecting R2 and R1. The metric of the > correct path is exactly 20k (directly connected over this shared segment). > > The example is typical, all of the other router's loopback's look the same > (except R8 which is it's buddy and directly connected). > > Any ideas on what else to look at? The OSPF database looks reasonable. Our > other shared segments act normal. All routers are on 11.4R2.
That is odd. Do all of the routers have a full adjacency with the DR and BDR? Does each router LSA show a transit link to the ID if the type 2 LSA for that network (it should show that address in the "data" field)? :w _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp