Just FYI: The Juniper SKU for the MX c19/c20 power cord is CBL-MX-PWR-C19-C20 if anyone needed it. Patrick
________________________________ From: joel jaeggli <joe...@bogus.com> To: JA <mjaferab...@gmail.com> Cc: juniper-nsp@puck.nether.net Sent: Thursday, August 23, 2012 9:08 AM Subject: Re: [j-nsp] MX960 AC power strip On 8/23/12 6:59 AM, JA wrote: > Hi > > I need advice if someone is having an MX960 up on AC power. > > Usually high capacity (32A) power bars (PDU) come with C13 or C19 outlets > while Juniper has no provision for such power cords. we use c19-c20 cables. we have a standard supplier for those so I don't believe we're using a juniper p/n the device (well the whole rack) is fed off two PDUs with a 30a 3 phase service for each > If European power > cords are ordered with MX960, the CEE7/7 plug can be connected to Schuko > outlets. But there is no Schuko PDU that supports more than 16A. One can > easily exceed 16A if two power supplies are connected on same PDU. > > Can anyone recommend some alternative or if anyone faced similar situation? > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
