maybe you can try using another junos release like 10.4r5 we are using here with no problems
On Wednesday, September 12, 2012, Alberto Santos wrote: > Hey everyone, > > I'm facing difficult times with srx5800 and snmpget. > I have a cluster which reports it is running over 100% CPU for it's RE0, > but it is not. > > Have someone ever seen this before? > > Routing Engine status: > Slot 0: > Current state Master > Election priority Master (default) > Temperature 33 degrees C / 91 degrees F > CPU temperature 29 degrees C / 84 degrees F > DRAM 2048 MB > Memory utilization 20 percent > CPU utilization: > User 0 percent > Background 0 percent > Kernel 3 percent > Interrupt 0 percent > Idle 97 percent > Model RE-S-1300 > Serial ID 9009074896 > Start time 2012-05-10 18:01:28 BRT > Uptime 124 days, 6 hours, 35 minutes, 35 > seconds > Last reboot reason Router rebooted after a normal shutdown. > Load averages: 1 minute 5 minute 15 minute > 0.10 0.04 0.01 > JUNOS Software Release [11.2R6.3] > > jnxOperatingCPU.9.1.0.0 = 100 > jnxOperatingCPU.9.3.0.0 = 100 > > -- > *BR/Alberto* > _______________________________________________ > juniper-nsp mailing list [email protected] <javascript:;> > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Giuliano Cardozo Medalha Systems Engineer +55 (17) 3011-3811 +55 (17) 8112-5394 JUNIPER J-PARTNER ELITE [email protected] http://www.wztech.com.br/ _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
