Metric the interface under the: config > protocols > ospf > area x.x.x.x > interface fe-x/x/x.x
section. Add a metric of 10 for example to your backup interface and it'll take effect without interrupting traffic (Ofc, do it both sides of the link).
--Lee On 19/09/2012 18:46, Rachid DHOU wrote:
Hello Experts, We have 4 routers : A,B,C and D. A and B are M7i C and D are M10i A connected to C , FE ==> Link 1 B connected to D, FE ==> Link 2 *OSPF and BFD* are runing in each link. but we made a high cost in link 2 (same area). The goal is that link doesn't forwoard traffic. For your opinion what is the best way to switch traffic from link 1 to Link 2. (i mean best way : the small dowtime and easy operation ) 1) In OSPF configuration Reduce cost on Link 2 2) Disable interface on Router A Don't forget BFD is runing on both links. Thanks for all your feedbacks. Kind regards, Rachid DHOU _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp