On 23/10/12 10:23 AM, david....@orange.com wrote: > Yes and you can check current hash config with the pfe cmd > > request pfe execute command "show jnh lb" target fpcX X=slot
First time I hear of this (hidden?) command. Doesn't work quite how you say: mx80> request pfe execute command "show jnh lb" target fpc0 error: command is not valid on the mx80-48t mx80> request pfe execute command "show jnh lb" target ? Possible completions: tfeb0 Connect to Forwarding Engine Board mx80> request pfe execute command "show jnh lb" target tfeb0 SENT: Ukern command: show jnh lb GOT: GOT: Unilist Seed Configured 0x8bce4c39 System Mac address 00:00:00:00:00:00 GOT: Hash Key Configuration: 0x0000000000e00000 0xffffffffffffffff GOT: IIF-V4: No GOT: SPORT-V4: Yes GOT: DPORT-V4: Yes GOT: TOS: No GOT: GOT: IIF-V6: No GOT: SPORT-V6: Yes GOT: DPORT-V6: Yes GOT: TRAFFIC_CLASS: No GOT: GOT: IIF-MPLS: No GOT: MPLS_PAYLOAD: Yes GOT: MPLS_EXP: No GOT: GOT: IIF-BRIDGED: No GOT: MAC ADDRESSES: Yes GOT: ETHER_PAYLOAD: Yes GOT: 802.1P OUTER: No GOT: GOT: Services Hash Key Configuration: GOT: SADDR-V4: No GOT: DADDR-V4: No GOT: IIF-V4: No GOT: GOT: SADDR-V6: No GOT: DADDR-V6: No GOT: IIF-V6: No GOT: LOCAL: End of file Looks good, I suppose? ~paul _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp