Thank yo very much! I have one more concern about scaling. What would be the maximum number Firewall Filter terms per system? I mean if I put several big prefix lists and apply an accept/drop actions on them will it be possible to have a total of a few thousand entries?
Thanx in advance On Thu, Oct 18, 2012 at 2:57 AM, Jerry Jones <jjo...@danrj.com> wrote: > Hi Emil, > > This will be different for each model. Most are in the 500 range per pre, > some can do around 1k. > > Get hold of your Juniper SE and he can help you out with scaling > questions. I would say most models are safe to 400, but over that you > should verify and test. > > Good luck. > > > On Oct 15, 2012, at 3:57 AM, Emil Katzarski <ekatzar...@gmail.com> wrote: > > Hi Troy, > > Unfortunately it is not so simple. There are 4096 VLAN IDs and you can > create that many VLANs in the system doing L2 bridging on them. If it is > possible to assign an operational IP interface on each of them is subject > of availability of another resource called IFL's. I don't know how many > IFL's are there in an EX3200. > > Anibody with an idea? > > On Fri, Oct 12, 2012 at 10:50 PM, Troy Coulombe <tcoulo...@telecomsys.com > >wrote: > > > Wouldn't it simply be the number of VLANs [4096 per the datasheet], > > although you can only configure 4094 per the CLI > > > > # set vlans test vlan-id ? > > Possible completions: > > <vlan-id> 802.1q tag (1..4094) > > > > Or am I missing something ... > > Thanks, > > TroyC > > > > > > -----Original Message----- > > From: juniper-nsp-boun...@puck.nether.net [mailto: > > juniper-nsp-boun...@puck.nether.net] On Behalf Of Emil Katzarski > > Sent: Thursday, October 11, 2012 8:31 AM > > To: juniper-nsp@puck.nether.net > > Subject: [j-nsp] Number of logical interfaces for EX switches > > > > Hi everybody, > > > > Can anyone help with finding some secret numbers about EX-series > switches. > > I didn't find them in any document. > > What I need is the number of L3 interfaces (RVI and vlan tagging units) > > that can be used on a single system. The maximum unit number of the VLAN > > interface is about 16k but it doesn't mean anything. > > > > So if anybody knows what is tha maximum number of L3 interfaces per > system > > for EX2200, EX3200, EX4200, EX4500 etc, please help. > > > > Kind regards: Emil Katzarski > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > CONFIDENTIALITY NOTICE: The information contained in this message may be > > privileged and/or confidential. If you are not the intended recipient, or > > responsible for delivering this message to the intended recipient, any > > review, forwarding, dissemination, distribution or copying of this > > communication or any attachment(s) is strictly prohibited. If you have > > received this message in error, please notify the sender immediately, and > > delete it and all attachments from your computer and network. > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp