Hi, NG-MVPN extranets are supported since junos 9.5:
http://www.juniper.net/techpubs/en_US/junos11.4/topics/topic-map/mcast-mbgp-extranets.html#jd0e120 As I remember in some corner cases(only two extranet VRFs on the same router - if my memory serves me right) there is NO need for tunnel hw (VT- ifls) - only "vrf-table-label" (lsi ifls) should do the trick. Best Regards, Krasi On Thu, Nov 22, 2012 at 2:54 PM, Vladislav A. VASILEV < vladislavavasi...@gmail.com> wrote: > Hi all, > > I need to deliver multicast data to a receiver in a VRF, which resides on > the same PE as the sender VRF. > > The only way I see this could be done is by putting one of the VRFs into a > logical system and presenting the traffic over an lt interface. The problem > is that this type of design does not scale. What if down the road I had > another customer which wanted to receive multicast data from both the > current sender/receiver? I'd then need to put it into another logical > system (basically introducing another PE, being a logical one)? > > What options do I have? > > Thanks, > Vladi > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp