Dear Westerlund, Thank you for your email. When I configure clustering all the configuration automatically moves to apply-groups [ node0 node1 ].
Regards, Bikash Bhattarai | Dristi Tech (P.) Ltd | +977 9851039710 | www.dristi.com.np Lazimpat, Kathmandu |Tel 977 1 4427949 | Fax 977 1 4410385* * On Sun, Nov 25, 2012 at 2:07 AM, Per Westerlund <p...@westerlund.se> wrote: > Begin with replacing 'apply-groups [ node0 node1 ];' with 'apply-groups > "${NODE}";', the idea is that the two nodes should have different > configurations. And while you are making changes, move the section on > "services" from "groups node0" to the global configuration, else it will > only work when you are connecting to node0, not node1. > > /Per Westerlund > > > 24 nov 2012 kl. 18:43 skrev Bikash Bhattarai: > > > Dear all, > > > > I have just configured two SRX 240 in clustering. One firewall is working > > as primary and another is working as secondary. When primary router wan > > interface fails the secondary router becomes primary. But after fail-over > > network becomes unreachable even from LAN side. > > > > I have attached the whole configuration.I have configured as per Juniper > > documentation. It will be very helpful if anyone point me if I am missing > > something. > > > > Regards, > > Bikash Bhattarai | Dristi Tech (P.) Ltd | +977 9851039710 | > > www.dristi.com.np > > Lazimpat, Kathmandu |Tel 977 1 4427949 | Fax 977 1 4410385* > > > > * > > <Cluster-Config.txt>_______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp