Problem: *Both SRX100 IPv6 VRRP are master role.* The topology is that two SRX100 are connected to Cisco 2950 switch. After configure IPv4 and IPv6 VRRP ready getting IPv4 VRRP is working as normal, but IPv6 VRRP is not working. A PC is able to ping IPv6 on each SRX100 but it is unable to ping virtual IPv6 address. Please advice or comment to fix IPv6 VRRP to work on SRX100. Thanks!
*SRX100-A# show interfaces vlan unit 90 family inet { address 192.168.147.2/24 { vrrp-group 1 { virtual-address 192.168.147.1; priority 110; preempt; accept-data; } } } family inet6 { address fe80::2/64; address 2001::2/64 { vrrp-inet6-group 2 { virtual-inet6-address 2001::1; virtual-link-local-address fe80::1; priority 110; preempt; accept-data; } } } SRX100-B# show interfaces vlan unit 90 family inet { address 192.168.147.3/24 { vrrp-group 1 { virtual-address 192.168.147.1; preempt; accept-data; } } } family inet6 { address fe80::3/64; address 2001::3/64 { vrrp-inet6-group 2 { virtual-inet6-address 2001::1; virtual-link-local-address fe80::1; priority 100; preempt; accept-data; } } } Result: SRX100-A# run show vrrp Interface State Group VR state VR Mode Timer Type Address vlan.90 up 1 master Active A 0.196 lcl 192.168.147.2 vip 192.168.147.1 vlan.90 up 2 master Active A 0.369 lcl 2001::2 vip fe80::1 vip 2001::1 SRX100# run show vrrp Interface State Group VR state VR Mode Timer Type Address vlan.90 up 1 backup Active D 3.310 lcl 192.168.147.3 vip 192.168.147.1 mas 192.168.147.2 vlan.90 up 2 master Active A 0.734 lcl 2001::3 vip fe80::1 vip 2001::1 * _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp