Hi, as per the Juniper documentation,
*Note: *Under the [edit forwarding-options port-mirroring instance * pm-instance-name*] hierarchy level, the protocol family statement family bridge is an alias for family vpls. The CLI displays Layer 2 port-mirroring configurations as family vpls, even for Layer 2 port-mirroring configured as family bridge. Cheers Siva On 9 January 2013 22:44, Terry Jones <terry.jo...@war-eagle.me> wrote: > Greetings All, > > > > I am trying to get a port mirror working with no success. I want to > port-mirror ge-1/0/0 interfaces that is interface-type access. > > > > When I configure the forwarding-options, there is no longer a bridge > option.only ccc, inet and vpls. Even though not showing, when I configure > 'forwarding-options port-mirroring instance wireshark9 family bridge', it > takes it, but changes it to 'forwarding-options port-mirroring instance > wireshark9 family vpls'. > > > > The port-mirror output shows down on the output, but I do see the counters > increment. > > > > Any thoughts, ideas or tips would be appreciated. > > > > tjo...@crsw01.cn.sb2# show forwarding-options port-mirroring instance > wireshark9 | display set > > set forwarding-options port-mirroring instance wireshark9 input rate 1 > > set forwarding-options port-mirroring instance wireshark9 family vpls > output > interface xe-5/2/1.0 > > set forwarding-options port-mirroring instance wireshark9 family vpls > output > no-filter-check > > > > tjo...@crsw01.cn.sb2# show interfaces ge-1/0/0 | display set > > set interfaces ge-1/0/0 unit 0 family bridge filter input wireshark9 > > set interfaces ge-1/0/0 unit 0 family bridge filter output wireshark9 > > set interfaces ge-1/0/0 unit 0 family bridge interface-mode access > > set interfaces ge-1/0/0 unit 0 family bridge vlan-id 802 > > > > tjo...@crsw01.cn.sb2# show firewall family bridge filter wireshark9 | > display set > > set firewall family bridge filter wireshark9 term 1 then count wireshark9 > > set firewall family bridge filter wireshark9 term 1 then accept > > set firewall family bridge filter wireshark9 term 1 then > port-mirror-instance wireshark9 > > > > tjo...@crsw01.cn.sb2# run show forwarding-options port-mirroring > wireshark9 > > Instance Name: wireshark9 > > Instance Id: 11 > > Input parameters: > > Rate : 1 > > Run-length : 0 > > Maximum-packet-length : 0 > > Output parameters: > > Family State Destination Next-hop > > vpls down xe-5/2/1.0 > > > > tjo...@crsw01.cn.sb2# run show firewall counter wireshark9 filter > wireshark9 > > > > Filter: wireshark9 > > Counters: > > Name Bytes > Packets > > wireshark9 80634 > 744 > > > > Thanks, > > Terry > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp