Config or it didn't happen Will O'Brien
On Feb 1, 2013, at 5:06 PM, "Ahmed Taha" <ahmedta...@hotmail.com> wrote: > > Hi all,I have a query , as I'm trying to establish LSP secondary tunnel , > but that secondary one becomes up for seconds , and then became down.Here is > the Output when using , show mpls lsp extensive: > Secondary two State: Dn > Priorities: 7 0 > SmartOptimizeTimer: 180 > No computed ERO. > 119 Feb 1 02:28:03.405 Clear Call > 118 Feb 1 02:28:01.818 Record Route: 192.168.14.2 172.16.16.2 172.17.17.2 > 192.168.17.2 192.168.18.2 > 117 Feb 1 02:28:01.818 Up > Last message I get is " Clear call" , I tried to check traceoptions for that > , I could see these wordsno constraints to check > Feb 1 02:28:01.786712 Link overlap with primary path, adding cost > 8000000and Long O/P , so could anyone advise me. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp