What did help was: set services rpm probe test test test thresholds total-loss <1-15>
The command is not required on EX/M/MX, and I don't know whether this is a bug or the expected behavior on SRXs. Regards, Vladi On Tue, Feb 5, 2013 at 10:32 AM, Vladislav A. VASILEV < vladislavavasi...@gmail.com> wrote: > Hi all, > > I have the following RPM configured on an SRX device: > > root# run show configuration services > rpm { > probe test { > test test { > probe-type icmp-ping; > target address 10.0.0.2; > test-interval 5; > } > } > } > > It's obvious that the probe is failing: > > root# run show services rpm history-results > Owner, Test Probe received Round trip time > test, test Tue Feb 5 18:21:38 2013 Request timed out > test, test Tue Feb 5 18:21:46 2013 Request timed out > test, test Tue Feb 5 18:21:55 2013 Request timed out > test, test Tue Feb 5 18:22:03 2013 Request timed out > > ... but not according to syslog: > > Feb 5 18:21:40 rmopd[1972]: PING_TEST_COMPLETED: pingCtlOwnerIndex = > test, pingCtlTestName = test > Feb 5 18:21:56 rmopd[1972]: PING_TEST_COMPLETED: pingCtlOwnerIndex = > test, pingCtlTestName = test > > I should be getting PING_TEST_FAILED instead. > > Has anyone come across this problem before? I've tried this on > 11.2/11.3/12.1 but got the same result. > > Thanks, > Vladi > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp