Hi All, My question is to clarify something that i have learned after a few hours of troubleshooting. I Want a confirmation before i can lock down my concept.
Lets take redistribution in Cisco IOS first. If I am redistributing, lets say from OSPF to ISIS, the routes learned via OSPF plus the interfaces advertised in OSPF will be redistributed into ISIS. I was doing the redistribution from OSPF to ISIS in Junos. Routes learned vis OSPF are sent into ISIS, but the interfaces advertised in the OSPF (of-course on the redistributing router) are not advertised into ISIS. Is this because my routing tables knows those subnets under "direct" and not in the OSPF table? Regards, *Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd a...@eintellego.net ; www.eintellego.net Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp