Sorry for hijacking! On Sat, Mar 23, 2013 at 11:05 AM, Tore Anderson <t...@fud.no> wrote: > * Marco Nesler > >> I need to deploy a small VC with EX4200 switches. For the junos version, >> usually i just stick with the JTAC recommended one. In this case NSSU and >> non stop bridging are a requirement, so i need to put a 12.something >> version on the vc. Any suggestion on a good 12.x release, stable and >> suitable for a small production environment ? >> The machines will be used basically as a small L2/L3 core, vlan switching, >> lacp, inter vlan routing, ospfv2/ospfv3 with single area with around 500 >> routes. > > Running 12.2R3 on an EX4500-VC here, having pretty much the same tasks > as you mention above. So far so good. Didn't actually try NSSU yet, but > having it available for future upgrades was my primary motivation for > going above 11.4 too.
That's interesting, have you seen any other 'gotchas' with 12.2R3? I'm running a 11.3 version and desperately want NSSU (among other things) and have a similar setup, lag/lacp/vlan termination/routing/ospf(v3). Does 3rd party transceivers work? How is missing licenses handled (enforced/warnings)? Thanks! -- Timh Bergström Head of System Operations +46 727 406 845 Videoplaza AB S:t Eriksgatan 46A Stockholm www.videoplaza.com _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp