Hi Luca, On Wed, Apr 10, 2013 at 2:50 PM, Luca Salvatore <l...@ninefold.com> wrote: > [...] > I have an EX4200 10.4r5.5, a few hours after turning on port mirroring the > switch crashed. It threw some memory parity errors which JTAC tells me means > the switch is faulty and should be replaced. > > The switch in question has been running fine for 3 years, but turning on a > ingress and egress port mirror (on a single port) seems to make the switch > have a bad day. The switch isn't busy, and the port that I'm mirroring has > about 80 to 100Mb of traffic. I'm mirroring the port to an IDS and would > like to keep it running for the foreseeable future. [...]
FWIW, I have lots of EX4200s with analyzers running 10.4R6 (not R5) and have never seen this problem. Sounds like a hardware thing. Cheers, Dale _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp