Just one word, to double check if i understand you. You would like to form a VC between 3300 and 4500?
That won't work. You can only form VC between 3300 or between 45xxx and 4200. Klaus — Sent from Mailbox for iPhone On Mon, Apr 15, 2013 at 9:41 AM, Nick Kritsky <nick.krit...@gmail.com> wrote: > Thanks. Just to clarify - I am actually trying to prevent this from > happening. > EX-3300 have ports xe-0/1/2 and xe-0/1/3 put in VC-port mode by default. So > I wonder if two fresh, brand new EX-3300 can form VC when they are plugged > into upstream 4550 using vc-ports. > This can explain some strange behavior i was observing recently, but I was > too busy fixing it, so I didn't run much tests. > I plan to setup small lab for that. I will let you know of the outcome. > nick > On Sun, Apr 14, 2013 at 4:33 PM, Klaus Groeger <kla...@gmail.com> wrote: >> Hi >> >> I would recommend Q-in-Q on the intermediate switch. I have seen 4550 VC >> spanning over metro erhernet, so this should work for 3300 also. >> >> Regards >> >> Klauzi >> — >> Sent from Mailbox <https://bit.ly/SZvoJe> for iPhone >> >> >> On Sat, Apr 13, 2013 at 9:21 PM, Nick Kritsky <nick.krit...@gmail.com>wrote: >> >>> Dear J-NSP, >>> >>> Can anyone confirm/deny if two EX3300 can form virtual-chassis when their >>> vc-ports are connected via third switch? >>> >>> thanks >>> nick >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> >>> >> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp