i have been told its an honor system however someone i know bought the license and it was just a piece of paper saying they could use it
On Thu, Apr 25, 2013 at 10:04 PM, OBrien, Will <obri...@missouri.edu> wrote: > My apologies, I didn't pay attention to the blade you referenced. > > That blade is only good for switching unless you have the appropriate > license to enable layer 3 protocols. > Here's the document the clarifies what you can do with that card. > > > http://www.juniper.net/techpubs/en_US/junos10.3/topics/task/configuration/chassis-mx-series-ip-ethernet-mode-configuring.html > > On Apr 25, 2013, at 5:39 PM, "OBrien, Will" <obri...@missouri.edu> > wrote: > > > No license needed. Just configure under protocols. > > > > Will O'Brien > > > > On Apr 25, 2013, at 5:17 PM, "John pp" <luklaupda...@gmail.com> wrote: > > > >> hi all > >> > >> i have a new MX480 with MPC-3D-16XGE-SFPP and I am trying to enable BGP > but > >> am not sure how? > >> someone said I need a license is this true? > >> you can email me: luklaupdates(AT, AT, FOR > >> SPAM)gmail.com<luklaupda...@gmail.com> > >> > >> thanks > >> _______________________________________________ > >> juniper-nsp mailing list juniper-nsp@puck.nether.net > >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp