Hey All, I was wondering if anyone out there has seen issues with 3rd party 1Gig LX Optics on the EX4550. We have a bunch of 3rd party optics working fine in EX2200s, 3200s and 4200s however when I stick them into the EX4550 it randomly likes to fail (I can't seem to figure out the pattern). Sometimes it will work and sometimes it wont. When it does fail however it seems to make the port inoperable until the switch is rebooted. (It also appears to make other ports break too, perhaps they are on the same PFE?). Even inserting a Genuine optic after the port has failed produces the same error. Without further ado here is the error it produces;
pr 10 04:44:45 sw01 chassism[1298]: ifcm_ifd_remove_vector: ifd ge-0/0/29 is_vcp 0 peer master Apr 10 04:44:48 sw01chassism[1298]: Error(2):I2C read of EEPROM failed for Port 14 at offset 0x0 Apr 10 04:44:48 sw01chassism[1298]: KOPTICS(1215): Error reading xcvr eeprom for PIC 61515 port 14 Apr 10 04:44:48 sw01chassism[1298]: XCVR: XCVR 14 EEPROM read Failed Apr 10 04:44:48 sw01chassism[1298]: xcvr_cache_eeprom: xcvr_read_eeprom failed - link:14 pic_slot:0 Apr 10 04:44:49 sw01chassism[1298]: Error(2):I2C read of EEPROM failed for Port 14 at offset 0x0 Apr 10 04:44:49 sw01chassism[1298]: KOPTICS(1215): Error reading xcvr eeprom for PIC 61515 port 14 Apr 10 04:44:49 sw01.chassism[1298]: XCVR: XCVR 14 EEPROM read Failed I would be interested to see if anyone else has encountered this? So far I can not replicate the issue with 3rd party Copper SPF;s or 10Gig SFP+'s. Cheers Joe _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
