Hi, Thanks a ton for your reply.
So we have two PIC (1x G/E and 4x 1GE) and it means we can have 2 gigs traffic max but 1 gig (MAX) combined in one PIC. Would like to request you to let me know how could we trace that any traffic is getting drop and or do I need to run any other troubleshooting? Thanks in advanced. Thanks & Regards, Abdullah Mullick Sr. Engineer - CNOC Indian Cable Net Company Limited J-1/12, Block - EP, 4th Floor, Sector - V, Kol-91 (91) 33 4002 5108 | Cell (91) 90511 33372 From: Gaurav Taparia [mailto:gaurav.tapa...@gmail.com] Sent: Friday, June 14, 2013 8:42 PM To: Abdullah Al Faruque Mullick Subject: Re: [j-nsp] Getting High Latency and Slow browsing Issue in Juniper M7i with RE-850 Hi, The combined back plane of the 4x1ge pic is 1gbps and you seem to be exceeding it. - GT On Jun 14, 2013 8:31 PM, "Abdullah Al Faruque Mullick" <abdullah.mull...@siticable.com<mailto:abdullah.mull...@siticable.com>> wrote: Hi Can anyone help me to sort out the issue or could tell me how to proceeds or how much traffic can m7i handle???? Please help me as I not getting anything wrong in M7i but in peak we are getting high latency and slow browsing issue.... Thanks in advanced... Thanks & Regards, Abdullah Mullick Sr. Engineer - CNOC Indian Cable Net Company Limited J-1/12, Block - EP, 4th Floor, Sector - V, Kol-91 (91) 33 4002 5108 | Cell (91) 90511 33372 From: Abdullah Al Faruque Mullick Sent: Wednesday, June 12, 2013 3:39 PM To: juniper-nsp@puck.nether.net<mailto:juniper-nsp@puck.nether.net> Subject: Getting High Latency and Slow browsing Issue in Juniper M7i with RE-850 Dear All We have one juniper M7i with RE-850 routing engine and with one 1x G/E, 4x 1GE(LAN), IQ2E PIC with Enhanced CFEB. Version: 11.2R3.3 For last few weeks we are observing high latency and as result slow browsing issue for the same. Interface details: ge-0/0/0 link-to-ISP1 avg. input BW 135Mbps ge-0/0/1 link-to-switch(aggregated port - 1) avg. input BW 450 Mbps and avg. out BW 150 Mbps ge-0/0/2 link-to-ISP2 avg. input BW 250 Mbps ge-0/0/3 link-to-switch(aggregated port - 2) avg. input BW 450 Mbps and avg. out BW 150 Mbps ge-1/3/0 link-to-ISP3 avg. input BW 550 Mbps and avg. out BW 300 Mbps as checked router load average is also OK. Load averages: 1 minute 5 minute 15 minute 0.00 0.06 0.05 What could be the issue? Please help us to sort out the issue... Thanks in advanced. Thanks & Regards, Abdullah Mullick ________________________________ This communication contains confidential or legally privileged information. The material, data, information, theme, ideas, stories, concepts, abstracts, notes, etc. (Proprietary Information) contained in this communication is the sole and exclusive property of Siticable Network Limited and form part of this communication solely for the discussion with the addressee. The Proprietary information contained in this communication may be used only in the manner and for the purposes as may be expressly permitted by Siticable Network Limited. If you are not the intended recipient and have received this Proprietary Information in error, please notify us immediately by responding to this by post/email and delete it from your records. Any use, utilization dissemination, distribution or copying of this Proprietary Information without proper authorization by us is strictly prohibited. Damages merely shall not be a sufficient remedy for violation of the aforesaid and we are entitled to th! e remedies by way of injunction, specific performance and other equitable relief for any breach of the above in addition to any other remedies available to us at law or in equity(c) 2008. Siticable employs every reasonable precaution to minimize risk arising from virus and malware, and ensure virus-free communication. However we cannot accept liability for any damage which may arise as a result of software viruses. Recipients are strongly advised to employ powerful and updated virus checks at their end. All rights reserved with Siticable Network Limited. www.siticable.com<http://www.siticable.com> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net<mailto:juniper-nsp@puck.nether.net> https://puck.nether.net/mailman/listinfo/juniper-nsp ________________________________ This communication contains confidential or legally privileged information. The material, data, information, theme, ideas, stories, concepts, abstracts, notes, etc. (Proprietary Information) contained in this communication is the sole and exclusive property of Siticable Network Limited and form part of this communication solely for the discussion with the addressee. The Proprietary information contained in this communication may be used only in the manner and for the purposes as may be expressly permitted by Siticable Network Limited. If you are not the intended recipient and have received this Proprietary Information in error, please notify us immediately by responding to this by post/email and delete it from your records. Any use, utilization dissemination, distribution or copying of this Proprietary Information without proper authorization by us is strictly prohibited. Damages merely shall not be a sufficient remedy for violation of the aforesaid and we are entitled to th! e remedies by way of injunction, specific performance and other equitable relief for any breach of the above in addition to any other remedies available to us at law or in equity(c) 2008. Siticable employs every reasonable precaution to minimize risk arising from virus and malware, and ensure virus-free communication. However we cannot accept liability for any damage which may arise as a result of software viruses. Recipients are strongly advised to employ powerful and updated virus checks at their end. All rights reserved with Siticable Network Limited. www.siticable.com _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
