You could do this over CCC on an MPLS core for sure (take the whole port not logical interfaces). If your core is q-in-q though, you can configure your customer vlans as a range instead of a single number. That potentially creates issues if multiple customers on the same SVLAN are using the same CVLAN id. However, if you use a single SVLAN per customer, then there's no issue.
I'd say it's easier to do this using CCC but YMMV. Aaron On Jul 1, 2013, at 4:11 AM, Sebastian Wiesinger wrote: > Hello, > > I need to do a sort of "dumb" Q-in-Q on a MX box. What I want from > the MX is: > > Take alle VLAN tagged frames on an Port (CE-facing) and switch > them to another interface (Core-Facing). On the core-facing interface > push VLAN 42 on the frames (Q-in-Q). > > When frames arrive on the core-facing IF, remove vlan tag 42 and > switch them to the CE. > > I don't need mac-learning for this as this is just p2p switching. > > (How) is that achievable? > > Regards > > Sebastian > > > -- > GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) > 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE > SCYTHE. > -- Terry Pratchett, The Fifth Elephant > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp