On Thu, Jul 25, 2013 at 2:21 PM, Sebastian Wiesinger <juniper-...@ml.karotte.org> wrote: > * sth...@nethelp.no <sth...@nethelp.no> [2013-07-25 01:21]: >> > "When using inline IPFIX the only valid rate is 1. The option >> > run-length isn't configurable, because there's no need to sample data >> > from the perspective of the microcode in the Trio Lookup Block. Every >> > packet will be inspected and is subject to flow export." >> >> We're doing inline IPFIX with 1:100 sampling rate, and getting sensible >> data. This is on an MPC-3D-16XGE-SFPP line card. Config snippet: > > I can confirm this, we use a higher sampling rate on MX80 and on the > MPC-3D-16XGE-SFPP and on both we get valid data.
Good to hear, I remembered reading that mostly because it seemed so wrong. I don't think I'm missing any context from the book, and I don't have any MPC/Trio based gear to test on myself. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp