You have to match them appropriately. Take a look at my nexus-srx example.
On Jul 26, 2013, at 9:30 AM, Mark Tinka wrote: > On Friday, July 26, 2013 03:21:32 PM R S wrote: > >> In a >> broadcast interface (GE) I’ve to run OSPF between my MX >> and some systems running OSPF. >> >> >> What about >> L2 and L3 MTU ? >> >> >> Can I fix >> greater MTU on MX and the OSPF adj will come up or not ? >> Pls advise > > Layer 3 MTU must match on link for OSPF adjacencies to come > up. > > I know you can ignore MTU mismatch in Cisco (did that when > deploying Quagga), but haven't tried it for Juniper. > > Mark. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp