This is a juniper forum so I apologize ahead of time for the vendor-C
reference below (but standards-based L2 works mostly the same across all
vendor implementations):
https://supportforums.cisco.com/thread/344842
--
Regards,
Ge Moua
Univ of Minn Alumnus
--
On 08/27/2013 08:16 AM, Johan Borch wrote:
Will that mean that I still have two roots, one in each network and
that they don't affect each other?
Regards
Johan
On Tue, Aug 27, 2013 at 2:53 PM, Ge Moua <moua0...@umn.edu
<mailto:moua0...@umn.edu>> wrote:
IIRC once joined, the MST and r-pvst L2 domains will speak CST (as
a common denominator). You may want to consider pruning vlans
where only needed (esp if you have a high vlan count on either or).
--
Regards,
Ge Moua
Univ of Minn Alumnus
--
On 08/27/2013 03:56 AM, Johan Borch wrote:
Hi!
I need to connect two spanning-tree domains, one is running
MSTP and one is
running rapid-pvst. Is this doable? The two networks have
different roots
and it needs to stay like that but I still need redundant
links between
them. I need to transport VLANs from one network to the other
and only one
side support MPLS.
Ideas? :)
Regards
Johan
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
<mailto:juniper-nsp@puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
<mailto:juniper-nsp@puck.nether.net>
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp