On Wed, Sep 18, 2013 at 01:51:29PM +0000, Anders Karlsson wrote: > Hi, > > It's known Juniper problem. Contact them and they will fix it.
Thanks for clarification. RMA is underway indeed, just wanted to check if I should expect more failures or it was some irregular spike. > > /Anders > > > > -----Original Message----- > > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On > > Behalf Of Alexandre Snarskii > > Sent: den 18 september 2013 15:43 > > To: Juniper-NSP Mailing list > > Subject: [j-nsp] SSD disks high failure ratio ? > > > > > > Hi! > > > > Anyone else experienced high failure ratio with SSD disks installed on > > RE-S-1800x4 or it's just we are that "lucky" to have two disks failed > > within one week ? :( > > > > PS: and, just to fill the gap in the documentation: these disks are not > > the usual 2.5" notebook-like, they are 1.8" mSATA, not yet widely used > > form-factor, so you can't just get replacement from the nearest PC > > shop. > > Discovering this after ~400km drive adds more fun :) > > > > -- > > In theory, there is no difference between theory and practice. > > But, in practice, there is. > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp -- In theory, there is no difference between theory and practice. But, in practice, there is. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp