On (2013-09-19 15:16 +0100), Alex Arseniev wrote: Hi Alex,
> Use explicit "encapsulation-type ethernet" under [protocols > l2circuit interface <> ] and You won't be seeing this mismatch. > On both sides of course. Whle this needs change in A-end also, it's very good tip, and I'll try that out. Just to be precise 'output-map swap' works just fine with different SVLAN in each ends, as long as there is SVLAN. If connection is without any SVLAN and we inject SVLAN, then for some reason JunOS will report VLAN-mismatch, even though it would not matter, as far end will swap it. -- ++ytti _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp