basically I've a triangulation A - B - C - A
single area 0
A-B link is 10Gbs
A-C and B-C is 1 Gbs
since in A-B run a very high volume of traffic (storage), I do not want if A-B
fails this traffic goes through C
C redistribute as well statics into OSPF
Hope it clear now
Subject: Re: [j-nsp] Junos ospf question
From: p...@westerlund.se
Date: Wed, 25 Sep 2013 10:23:39 +0200
CC: ipv6fre...@gmail.com; juniper-nsp@puck.nether.net
To: dim0...@hotmail.com
Can you give some more details? I'm not sure I understand all of your
requirements.
Are you trying to influence something native to OSPF, or are you talking about
setting metrics for routes redistributed (Cisco-speak) from another protocol?
/Per
25 sep 2013 kl. 10:09 skrev R S <dim0...@hotmail.com>:I understood the same and
I need to be able to drop network announcement in a very granular way...
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
