hey all, we have an EX9208 that is reporting a Minor alarm as follows:
user@hostname> show system alarms 2 alarms currently active Alarm time Class Description 2013-09-27 17:40:56 EDT Minor CB 0 Fabric Chip 1 Not Online 2013-09-27 17:40:56 EDT Minor CB 0 Fabric Chip 0 Not Online My experience with EX9200s switch fabrics is fairly limited (they are new after all) but since it's more or less an MX480 chassis, SCB, and RE I was hoping some with more MX experience than I would have input to these messages. RE0 is the master RE, but looking at the output and also the LCD's on the SCBs it would appear that SCB1 is the active SCB as opposed to SCB0. The chassis has been up for 40+ days, however output of "show chassis fabric summary" (output below) reports 11+ days of uptime on the current fabric (SCB1 I suppose). user@hostname> show chassis fabric summary Plane State Uptime 0 Offline 1 Offline 2 Offline 3 Offline 4 Online 11 days, 21 hours, 39 minutes, 57 seconds 5 Online 11 days, 21 hours, 39 minutes, 56 seconds 6 Online 11 days, 21 hours, 39 minutes, 57 seconds 7 Online 11 days, 21 hours, 39 minutes, 54 seconds Note: For FPC slots with MPC Type 4 or MCC: Fabric planes 1 and 5, 3 and 7 use shared physical links. Those slots may run in a reduced bandwidth in case both plane 1 and 5, or both 3 and 7 are active. >From what I can tell service has not been impacted or anything, but curious if >this is more cosmetic, or if I might have a failed / failing SCB that I need >to get RMA'd, or what might have triggered an SCB switchover, but not RE >switchover. I intend to open a case with JTAC but was hoping the list might >have some insight as well. Thanks, Will _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
