Hello,
lo0.777 has the rp address, and the lt-1/1/10.770 is the link between
PE and multicast source (it's a single MX with logical-systems and I
already tried the same setup with physical interfaces between PE and CE
with the same result):
x> show configuration interfaces lo0 unit 777
family inet {
address 20.20.20.111/32;
}
x> show configuration interfaces lt-1/1/10.770
description x-a;
encapsulation ethernet;
peer-unit 771;
family inet {
address 10.100.1.1/24;
}
On 10/22/2013 08:07 PM, Antonio Sanchez-Monge wrote:
Hi Mihai,
Doesn't ring a bell at first sight. What's the configuration of interfaces
lo0.777 and lt-1/1/10.770 ?
Thanks,
Ato
On 10/22/13 6:56 PM, "Mihai Gabriel" <mihaigabr...@gmail.com> wrote:
Hello,
I have a basic setup with 2 PE's (X and Z) , one multicast source
attached
to X and one receiver attached to Z.
I configured a NG-MVPN with rsvp-te between PE's but X doesn't send SA
autodiscovery to Z so the traffic is dropped.
x> show configuration routing-instances
mvpn {
instance-type vrf;
interface lt-1/1/10.770;
interface lo0.777;
route-distinguisher 1:1;
provider-tunnel {
rsvp-te {
label-switched-path-template {
default-template;
}
}
}
vrf-target target:1:1;
vrf-table-label;
protocols {
pim {
rp {
local {
address 20.20.20.111;
}
}
interface all;
}
mvpn;
}
}
z> show configuration routing-instances
mvpn {
instance-type vrf;
interface lt-1/1/10.772;
route-distinguisher 1:2;
provider-tunnel {
rsvp-te {
label-switched-path-template {
default-template;
}
}
}
vrf-target target:1:1;
vrf-table-label;
protocols {
pim {
interface all;
}
mvpn;
}
}
x> show multicast route instance mvpn extensive
Instance: mvpn Family: INET
Group: 239.1.1.1
Source: 10.100.1.2/32
Upstream interface: lt-1/1/10.770
Session description: Organisational Local Scope
Statistics: 10 kBps, 10 pps, 1291 packets
Next-hop ID: 0
Upstream protocol: PIM
Route state: Active
Forwarding state: Pruned
Cache lifetime/timeout: 360 seconds
Wrong incoming interface notifications: 0
Uptime: 00:10:37
Instance: mvpn Family: INET6
x> show route receive-protocol bgp 20.20.20.2 table mvpn.mvpn.0
mvpn.mvpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
Prefix Nexthop MED Lclpref AS path
1:1:2:20.20.20.2/240
* 20.20.20.2 100 I
z> show route receive-protocol bgp 20.20.20.1 table mvpn.mvpn.0
mvpn.mvpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
Prefix Nexthop MED Lclpref AS path
1:1:1:20.20.20.1/240
* 20.20.20.1 100 I
x> show mpls lsp p2mp
Ingress LSP: 1 sessions
P2MP name: 1:1:mvpn:mvpn, P2MP branch count: 1
To From State Rt P ActivePath LSPname
20.20.20.2 20.20.20.1 Up 0 *
20.20.20.2:1
:1:mvpn:mvpn
Total 1 displayed, Up 1, Down 0
Egress LSP: 1 sessions
P2MP name: 1:2:mvpn:mvpn, P2MP branch count: 1
To From State Rt Style Labelin Labelout LSPname
20.20.20.1 20.20.20.2 Up 0 1 SE 16 -
20.20.20.1:1:2:mvpn:mvpn
Total 1 displayed, Up 1, Down 0
Transit LSP: 0 sessions
Total 0 displayed, Up 0, Down 0
Am i doing something wrong?
Thanks
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp