Yeah , you can do so....You don't need any explicit configuration on SRX Side, while you would need to enable LACP on Switch port level.
All the 6 interfaces/Firewall will participate in one reth interface and then you can enable vlan-tagging to provision inter-vlan routing. You will be having interface like (e.g) reth1.100, reth1.110, reth1.120 as per your VLANs configuration. Muhammad Fahad Khan JNCIE-M # 756 Lead Network and Security Consultant - IBM +92-301-8247638 Skype: fahad-ibm http://pk.linkedin.com/in/muhammadfahadkhan On Mon, Oct 28, 2013 at 2:28 AM, Mohammed Shafi <msh...@abc.com.qa> wrote: > Dear experts, I have query regarding SRX (650)cluster lag between and > ex-4550 virtual chassis. I have 6 physical link from each member VC to > wards each node in the srx cluster . I have multiple vlans in ex switch > and planing to host the L3 interface in srx cluster . Now the question is > can i build a lag between ex and srx with a SINGLE reth interface , say > reth 1 and associate all physical interfaces from ex switch ( 6 interface , > total 12 ) and enable vlan tagging under reth 1 with unit interfaces for l3 > interfaces . > > Is there any limitation for reth interface such that it can only have a > pair of physical interfaces from each node ? > > Sent from my iPad > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp