On 26/11/13 04:25, Chris Cappuccio wrote:
Phil Mayers [p.may...@imperial.ac.uk] wrote:
cpp0 swanhill10: SPU10 mbuf stall exceed 80%, p 0% h 0% j 82%, set alarm.
alarmd[1152]: Alarm set: FPC color=RED, class=CHASSIS, reason=FPC 10 Major
Errors
craftd[1153]: Major alarm set, FPC 10 Major Errors
The chassis alarm can't be cleared without a reboot.
Anyone run into anything similar? Any way to fix this without a reboot?
Run better JunOS code.
I'm not entirely sure if this was intended as humorous or helpful, but
as it happens you're pretty close to the mark. Apparently this is
present in the X45 but not X44 or 11.4 code, and is known under PR
918415. It will be fixed in X45-20, apparently due in January.
FWIW we're running the 12.1X series code as we have the combined NP-IOC
cards which need it. I can't remember if the NP-IOCs are supported in
X44, but aside from this bug (which is pretty easy to avoid - don't
remove a policy permitting multicast traffic) the X45 code has been OK
so far, so we'll probably live with it.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
